The lowest on your roof
The Brivis Contour Cooler is the least obtrusive evaporative cooler in Australia. Its sloping base offers the lowest profile on your roof, which is ideal if you don’t want to alter the look of your home. The Brivis Contour is also available in the five most popular roofing colours in Australia. That is Terra Red, Charcoal, Beige, Rivergum and Chocolate.
THE MOST ADVANCED TECHNOLOGY
The Brivis Contour Cooler has unique features which make it far more effective at cooling your home than other coolers while requiring the least amount of water and maintenance. Every stage of the Brivis Contour’s operation has been designed to make it reliable, discreet and healthy for you.
When you turn your cooler on inside the home, the Brivis Contour begins its Pre-Wet cycle. Clean, fresh water enters the cooler and begins soaking the cooling pads before the fan even starts, ensuring that you will be provided with cool fresh air immediately when the fan starts. It is packed with features to give you comfort and flexibility.
The shape of the Brivis Contour’s base means it holds up to a third less water than other coolers, saving valuable water during the hot Australian summer months.
The SynchroDrive Pump sits in its own waterproof chamber, and is designed to be self cleaning by spinning in the opposite direction to clear blockages, if they occur.
The water is pumped into the unique Brivis Aqua-Duct. With large channels and drain holes, every pad is saturated, evenly and quickly. Once the pads are saturated, the fan turns on.
The Brivis Contour has a variable speed fan which gives you a wide range of speeds and allows the cooler to run much slower than other coolers. This is great on a hot night when all you want is a gentle breeze to keep you cool so you can get to sleep.
Due to our policy of continuous improvement, product specifications and details are subject to change without notice.
The air is pushed from the fan through the unique Brivis Contour ServoSeal and into the duct work in your ceiling. The ServoSeal is the only motorised cooler seal on the market. The ServoSeal retains warmth in your house on cold days when it’s closed, and when open, it manages the airflow reducing turbulence and noise.
The Brivis Contour uses the Trident Water Sensor to manage water levels in the tank. When you turn your cooler off, the Brivis Contour automatically runs a Fresh Start operation. The tank is emptied and thoroughly flushed clean which means that there is no dirty water or sediment sitting in the cooler before it starts up again.
Guaranteed to last
The Brivis Contour Cooler is designed and made in Australia to withstand our variable and often harsh climate. The plastic housing is made of a tough UV-stabilised plastic to resist the sun’s rays, and is designed for strength and durability. The Brivis Contour’s high tech electronics are easy to access and are kept dry in a safe, waterproof casing for added longevity.
The most choices
The Brivis Contour has several different control options and colours to choose from so that you can select the right cooler for your needs. The Brivis Contour has three controller options – the Networker, the Programmable or the Manual Controller
- AquaSave water management system
- ServoSeal motorised winter seal
- Low profile sloping base
- Pre-wet function
- Large Cooling Capacity
- Up to 130mm thick cooling pads
- Available in five colours: Charcoal, Terra Red, Beige, Rivergum and Chocolate