The Brivis Advance looks great on your roof. The Brivis Advance is available in the three most popular roofing colours in Australia (Beige, Charcoal & Terra Red). The Brivis Advance design also allows the cooler to sit lower and more discreetly on your roof.
The Brivis Advance Cooler is the latest innovation from Brivis, incorporating some of the advanced technologies developed from the Brivis Profiler and Brivis Contour series. For example, the Brivis Advance incorporates the Brivis designed fan, maximizing airflow with quiet operation. The Brivis Advance decor panels are similar to the Brivis Profiler series, resulting in a unit that is attractive on the roof.
When you turn your cooler on inside your home, the Brivis Advance begins its Pre Wet cycle. The water enters the cooler and begins soaking the cooling pads before the fan starts. This ensures that when the fan does start, the pads will provide you with cool air inside your home immediately.
The Brivis Advance has a sloping water trough which keeps the water moving toward the pump and constantly circulating through the system, keeping it fresh and clean and reducing the weight of the cooler on the roof.
Brivis coolers use a pump which sits in its own waterproof chamber, ensuring that the pads are soaked in clean water all the time. The SynchroDrive pump is designed to be self cleaning by spinning in the opposite direction to clear blockages, if they occur
The water is pumped into the unique Brivis Aqua-Duct. With large channels and drain holes, every pad is saturated, evenly and quickly. Once the pads are saturated, the fan turns on.
The Brivis Advance has a variable speed fan which gives you a wide range of speeds and allows the cooler to run much slower than other coolers. This is great on a hot night when all you want is a gentle breeze to keep you cool so you can get to sleep.
In the Brivis Advance, the AutoRefresh water management system controls the amount of clean water added to the system. Once a pre-determined number of fill cycles have been completed the cooler will automatically flush the entire tank and refill it with clean water. While the water is being refreshed the cooler continues to operate, unlike coolers that use a dump and fill cycle to refresh the tank water.
When cooling is no longer required the Brivis Advance will automatically run the FreshStart operation which means there is no dirty water or sediment sitting in the cooler before it starts up again.
The Brivis Advance has several different options, colours and models to choose from so that you can select the right cooler for your needs. The Brivis Advance has three controller options – The Networker, The Programmable Controller or the Manual Controller.
Brivis dealers and installers are carefully selected and trained by Brivis to help you get the most from your investment.
* Comes in the three most popular roofing colours in Australia
* Has a Pre-Wet Cycle that ensures when the fan starts you will be provided with cool air inside your home
* The water is pumped into the unique Brivis Aqua-Duct which has large channels and rain holes to make sure every pad is saturated evenly and quickly
* Variable speed fan to provide you with a quiet cool breeze at night
- High efficiency cooling pads
- WinterSeal available to prevent heat escaping in winter
- Extra airflow
- Available in three colours: Charcoal, Terra Red and Beige